Where is the Water Filter on My Jenn Air Refrigerator? A Quick Guide
Having a water filter in your refrigerator is important for ensuring you have clean and safe drinking water. It helps to remove impurities, such as chlorine, bacteria, and other contaminants that may be present in your water supply. If you own a Jenn Air refrigerator and are wondering where to find the water filter, this quick guide will provide you with all the information you need.
Locating the Water Filter
If you are unable to locate the water filter on your Jenn Air refrigerator, don’t worry, you are not alone. Many refrigerator owners often struggle with finding the elusive water filter. The location of the water filter can vary depending on the model and design of your specific Jenn Air refrigerator.
Inside the Refrigerator
In some Jenn Air refrigerators, the water filter is located inside the refrigerator compartment. You will typically find it situated towards the rear of the compartment, either on the ceiling or the back wall. Look for a small round or rectangular compartment with a filter icon or label.
Behind the Grille
For other models, you may find the water filter located behind the grille at the bottom of your refrigerator. The grille is the front panel that covers the base of the refrigerator and can easily be removed. Once the grille is removed, you should see a cylindrical filter housing.
In the Base Grille
In certain Jenn Air refrigerator models, the water filter can be found in the base grille. The base grille is the kick plate located at the bottom of the refrigerator, just above the floor. There may be a push button or latch that allows you to release the filter housing, which can then be pulled out for replacement.
Inside the Fresh Food Compartment
A few Jenn Air refrigerator models have the water filter housed inside the fresh food compartment. Check the upper-right corner of the compartment, near the rear wall. The filter compartment may be concealed behind a door or cover that needs to be opened to access the filter.
Removing and Replacing the Water Filter
Once you have successfully located the water filter in your Jenn Air refrigerator, it is essential to know how to remove and replace it properly. Follow the steps below to ensure a smooth and hassle-free process.
Step 1: Prepare
Before you begin, make sure to turn off the water supply to the refrigerator. This will prevent any leaks or spills during the filter replacement process. Additionally, locate the bypass plug that came with your refrigerator. This plug allows you to bypass the water filter temporarily if needed.
Step 2: Remove the Old Filter
If your filter is located inside the refrigerator, gently twist it counterclockwise to release it from its housing. Be careful not to spill any water that may be trapped inside the housing. If your filter is behind the grille or in the base grille, follow the manufacturer’s instructions to remove the housing and replace the filter.
Step 3: Install the New Filter
Take the new water filter and align it with the opening. Slowly rotate it clockwise until it locks into place. If your filter is inside the refrigerator, make sure it is fully inserted and seated properly. For filters located behind the grille or in the base grille, follow the instructions provided to reassemble the housing with the new filter in position.
Step 4: Flush the System
After installing the new filter, it is crucial to flush the system to remove any air or loose particles. Run water through the dispenser for a few minutes or until the water runs clear. This will help to ensure that your water is clean and free from any impurities that may have been introduced during the filter replacement process.
Step 5: Reset the Filter Change Indicator
Some Jenn Air refrigerators have a filter change indicator that signals when it is time to replace the filter. After installing the new filter, make sure to reset the indicator to ensure accurate monitoring of the filter’s lifespan. Refer to your refrigerator’s user manual for instructions on resetting the filter change indicator.
Maintaining a Healthy Water Filter
Regular maintenance of your Jenn Air refrigerator’s water filter is essential to ensure its optimal performance. Here are a few tips to help you maintain a healthy water filter:
Replace on Schedule
It is recommended to replace your water filter every six months or as instructed by the manufacturer. This will help maintain the filter’s effectiveness in removing contaminants and ensuring clean drinking water.
Proper Storage
If you have spare water filters, make sure to store them in a cool and dry place. Extreme temperatures and humidity can affect the filter’s performance and lifespan.
Check for Leaks
Regularly inspect the water filter and its housing for any signs of leaks or damage. If you notice any leaks or suspect issues with the filter’s performance, it may be time for a replacement or professional maintenance.
Filter Bypass
If you plan to be away from home for an extended period, consider using the bypass plug provided with your refrigerator to bypass the water filter temporarily. This will prevent the filter from sitting unused for an extended period and avoid any potential issues caused by stagnant water.
In conclusion, locating the water filter in your Jenn Air refrigerator may seem like a challenging task at first, but with this quick guide, you should now be equipped with the knowledge to find and replace the water filter with ease. Remember to follow the manufacturer’s instructions and maintain a regular replacement schedule for a clean and healthy water supply.