Samsung refrigerators are known for their advanced features and innovative designs. One of the key components in these refrigerators is the water filter. The water filter is responsible for ensuring that the water you drink and use for cooking is clean and free from impurities. Over time, the water filter may become clogged or less effective, and it is important to know how to change it for optimal drinking water quality. In this article, we will guide you through the process of changing the water filter on a Samsung refrigerator RF28HMEDBSR.
Gather the necessary tools
Before you start the process of changing the water filter, it is important to gather all the necessary tools. You will need a new water filter, a wrench or pliers, a bucket or towel, and a sponge or cloth. These tools will help you safely and efficiently change the water filter without any mess or hassle.
Locate the water filter
The next step is to locate the water filter in your Samsung refrigerator RF28HMEDBSR. The water filter is usually located in the upper right-hand corner of the refrigerator compartment. It is important to note that the exact location may vary depending on the model of your refrigerator, so it is always a good idea to refer to the user manual for specific instructions.
Step 1: Turn off the water supply
Before you proceed with changing the water filter, it is crucial to turn off the water supply. This will prevent any water leakage or spills during the process. Look for the water shut-off valve behind the refrigerator and turn it clockwise to shut off the water supply. It is essential to ensure that the water supply is completely shut off before proceeding to the next step.
Step 2: Prepare for filter removal
Once the water supply is turned off, you can prepare for the removal of the old water filter. Place a bucket or a towel under the filter area to catch any water that may drip out during the process. This will help prevent any mess and keep your kitchen clean. It is also a good idea to have a sponge or cloth handy to wipe away any excess water.
Step 3: Unlock the old filter
To remove the old water filter, you will need to unlock it first. Look for the filter housing, which is a cylindrical container that holds the filter in place. Twist the filter housing counterclockwise to unlock it. Some models may require you to push a release button before twisting the housing. Follow the instructions in your user manual to unlock the filter properly.
Step 4: Remove the old filter
Once the filter housing is unlocked, you can proceed to remove the old water filter. Grasp the filter firmly and pull it straight out. Be careful as there might be some water remaining in the filter housing, so try to tilt the filter slightly upwards to avoid any spills. Set the old filter aside for proper disposal.
Step 5: Install the new filter
Now that the old filter is removed, it is time to install the new one for optimal drinking water quality. Take the new water filter out of its packaging and remove any protective covers or seals. Insert the filter into the filter housing, aligning the arrows or other markings on the filter with those on the housing. Push the filter firmly into place until it locks in position.
Step 6: Lock the filter housing
After the new filter is properly installed, it is important to lock the filter housing to secure the filter in place. Twist the filter housing clockwise until it is firmly locked. Some models may click or make a sound when the housing is locked. Ensure that the filter housing is securely fastened to prevent any water leakage.
Step 7: Turn on the water supply
With the new filter securely installed, you can now turn on the water supply. Locate the water shut-off valve and turn it counterclockwise to restore the water flow. This step will allow water to reach the new filter and flush out any air or impurities. It is recommended to run the dispenser for a few minutes to ensure that any trapped air is released and the water is flowing smoothly.
Final Thoughts
Changing the water filter on your Samsung refrigerator RF28HMEDBSR is a simple process that can significantly improve the quality of your drinking water. By following these step-by-step instructions, you can ensure that your water filter is always clean and functional. It is recommended to change the water filter every six months or when the filter indicator light illuminates, whichever comes first. Regularly changing the water filter will not only improve the taste and odor of your drinking water but also protect your health by removing harmful contaminants. So, take the time to change your water filter and enjoy the benefits of clean and pure drinking water.