Introduction
A refrigerator is an essential appliance in every household, and it is crucial to ensure its proper functioning. Whirlpool refrigerators are known for their durability and high-quality performance. However, over time, you may notice that your refrigerator is not leveled. This can lead to a variety of issues, such as doors not closing properly or even causing the refrigerator to be unsteady. One effective solution to this problem is to lower the wheels of your Whirlpool refrigerator. In this article, we will provide you with a step-by-step guide on how to lower the wheels on your Whirlpool refrigerator and restore its stability.
Why Should You Lower the Wheels?
Ensuring Proper Leveling
One of the primary reasons to lower the wheels of your Whirlpool refrigerator is to ensure proper leveling. When your refrigerator is leveled, the doors close smoothly, and the appliance remains stable. If the refrigerator is not leveled, you might notice that the doors become misaligned, leading to improper sealing and cooling efficiency. By lowering the wheels, you can bring balance to your refrigerator and prevent these issues.
Preventing Unwanted Movement
Another reason to lower the wheels of your Whirlpool refrigerator is to prevent any unwanted movement. If the wheels are too high, the refrigerator may become unsteady, making it prone to shifting or rolling when opening the doors. This not only poses a safety risk but can also damage the flooring or cause items to fall off the refrigerator. By lowering the wheels, you can stabilize your refrigerator and eliminate any potential hazards.
Reducing Noise and Vibration
An unlevelled refrigerator can generate unnecessary noise and vibration. This can be quite bothersome, especially if your kitchen is close to your living or sleeping area. By lowering the wheels and leveling your Whirlpool refrigerator, you can significantly reduce the noise and vibration, creating a quieter and more comfortable environment.
Step-by-Step Guide to Lower Wheels on your Whirlpool Refrigerator
Step 1: Preparation
Before you start the process of lowering the wheels on your Whirlpool refrigerator, make sure to gather the necessary tools. You will need a wrench or pliers and a level for this task.
Step 2: Locate the Adjustable Feet
Position yourself in front of your Whirlpool refrigerator and locate the adjustable feet at the bottom of the appliance. These are usually located at the front corners or at the front and rear sides of the refrigerator. Take a closer look to identify which type of feet your refrigerator has, as this may affect the method of adjustment.
Step 3: Determine the Required Adjustment
Using a level, check the current levelness of your refrigerator. Place the level at different spots on the top surface of the refrigerator and observe the bubble. If the bubble is not centered in the level, it indicates that the refrigerator is not level and needs adjustment. Take note of the areas that require correction.
Step 4: Adjust the Feet
Depending on the type of feet your Whirlpool refrigerator has, the adjustment method may vary:
If you have adjustable screw-type feet:
Use a wrench or pliers to turn the adjustable screws counterclockwise. This will lower the feet and reduce the height of the refrigerator. Continue to turn until the refrigerator is leveled. Make sure to adjust all corners equally for a balanced result.
If you have slot-type feet:
Use a screwdriver to turn the slot-type adjustment screws counterclockwise. This will lower the feet, keeping the refrigerator stable. Ensure that all corners are adjusted equally for optimal leveling.
Step 5: Checking Levelness
Once you have adjusted the feet, recheck the levelness of your Whirlpool refrigerator. Place the level on various spots again and observe the bubble. If the bubble is centered, congratulations! Your refrigerator is now level. If not, repeat the adjustment process until the refrigerator is completely leveled.
Step 6: Test Sturdiness
Now that your Whirlpool refrigerator is leveled and the wheels are lowered, it’s time to test its sturdiness. Open and close the doors to ensure they close smoothly without any misalignment. Carefully push and pull the refrigerator in different directions to check if it remains stable and doesn’t wobble. If the doors close properly and the refrigerator remains steady, you have successfully accomplished the task.
Maintaining Proper Leveling
Once you have successfully lowered the wheels of your Whirlpool refrigerator, it is important to periodically check and adjust the levelness to maintain its stability. As time passes, the appliance may shift or settle, causing the refrigerator to become unlevelled again. Regularly perform the levelness check using a level and make necessary adjustments if needed.
Conclusion
A well-leveled refrigerator is crucial for its optimal performance and longevity. By following this step-by-step guide on how to lower the wheels on your Whirlpool refrigerator, you can restore stability, prevent unsteady movement, reduce noise and vibration, and ensure proper sealing of the doors. Regularly maintaining the levelness of your refrigerator will help in avoiding any future issues. So, go ahead and make your Whirlpool refrigerator a reliable and steady appliance in your kitchen!