GE refrigerators are known for their high quality and durability. They are designed to provide optimum cooling and storage solutions for your food and beverages. However, like any other appliance, they may require some adjustments and repairs over time. One common issue that you may encounter with your GE refrigerator is uneven leveling legs. Uneven leveling legs can cause your refrigerator to wobble or tilt, leading to potential damage to both the appliance and your floors. In this article, we will provide you with a step-by-step guide on how to raise the leveling legs on your GE refrigerator and restore its stability.
Why are Leveling Legs Important?
Before we dive into the step-by-step guide, let’s understand why leveling legs are important for your GE refrigerator. Leveling legs are adjustable feet located at the bottom of the appliance. They help stabilize the refrigerator and ensure that it remains level on uneven surfaces. By keeping your refrigerator level, the leveling legs prevent excessive vibrations and wobbling, which can affect its performance and lifespan. Additionally, a level refrigerator ensures that the doors open and close properly, preventing any cold air leakage or spoiling of food.
Step 1: Prepare Your Tools
To raise the leveling legs on your GE refrigerator, you will need a few tools. Make sure you have the following items handy before you begin:
1. Adjustable Wrench
An adjustable wrench will help you loosen and tighten the locking nuts on the leveling legs.
2. Bubble Level
A bubble level is essential to check the refrigerator’s levelness accurately. It will ensure that your adjustments are precise.
3. Tape Measure
A tape measure will assist you in measuring the height and alignment of the leveling legs.
Step 2: Locate the Leveling Legs
The next step is to locate the leveling legs on your GE refrigerator. Typically, there are two leveling legs located at the front, one on each side, and two or three at the rear.
Step 3: Empty the Refrigerator
Before you start adjusting the leveling legs, it’s recommended to empty the contents of your refrigerator. This precautionary step ensures the safety of your food items and prevents any accidents or spills.
Step 4: Level the Refrigerator
Now that you have prepared your tools and emptied the refrigerator, it’s time to level it. Follow the below steps to achieve a level position:
1. Check the Current Level
Place the bubble level on top of the refrigerator from front to back. Adjust the refrigerator’s position until the bubble level is centered. This step will help you determine the current levelness of the refrigerator.
2. Check Side-to-Side Levelness
Place the bubble level on one side of the refrigerator and then on the other side. Adjust the refrigerator’s position until the bubble level is centered in both directions.
3. Check Front-to-Back Levelness
Place the bubble level at the front of the refrigerator and then at the back. Adjust the refrigerator’s position until the bubble level is centered in both directions.
Step 5: Adjust the Leveling Legs
Once you have determined the current levelness of your GE refrigerator, it’s time to adjust the leveling legs. Follow these steps to raise the leveling legs:
1. Identify the Adjustable Nut
Locate the adjustable nut on each leveling leg. This nut is used to raise or lower the leveling leg.
2. Loosen the Locking Nut
Using an adjustable wrench, loosen the locking nut by turning it counterclockwise. This will enable you to adjust the leveling leg easily.
3. Raise or Lower the Leveling Leg
Using the adjustable wrench, rotate the adjustable nut clockwise to raise the leveling leg. Turn it counterclockwise to lower the leveling leg. Use the bubble level to ensure the refrigerator remains level throughout the adjustment process.
4. Tighten the Locking Nut
After adjusting the leveling leg, tighten the locking nut by turning it clockwise with the adjustable wrench. This will secure the leveling leg and prevent it from moving unintentionally.
5. Check the Levelness
Repeat steps 4 to 6 for each leveling leg. After adjusting all the leveling legs, recheck the refrigerator’s levelness using the bubble level as mentioned in Step 4.
Step 6: Test the Stability
Once you have adjusted all the leveling legs and ensured the refrigerator’s levelness, it’s time to test its stability. Gently push and pull the refrigerator to check for any wobbling or tilting. If the refrigerator feels stable and does not wobble, congratulations! You have successfully raised the leveling legs of your GE refrigerator.
Conclusion
Proper leveling is crucial for the optimal performance of your GE refrigerator. Uneven leveling legs can lead to various issues, such as excessive vibrations, doors not closing properly, or even potential damage to the appliance itself. By following this step-by-step guide, you can effortlessly raise the leveling legs of your GE refrigerator and restore its stability. Remember, regular maintenance and inspections of your refrigerator will help prolong its lifespan and ensure it continues to provide efficient cooling for years to come.