How to Remove Platter Pocket from Whirlpool Refrigerator: A Simple Guide

Platter Pocket is a convenient feature found in many Whirlpool refrigerators that allows users to store and easily access plates and flat items. However, there may come a time when you need to remove the Platter Pocket for cleaning or maintenance purposes. In this simple guide, we will walk you through the step-by-step process of removing the Platter Pocket from your Whirlpool refrigerator.

Preparing for Removal

Before you begin the removal process, it is important to gather the necessary tools and materials. You will need a flathead screwdriver, a clean cloth, and a mild detergent or cleaning solution. Make sure to unplug the refrigerator from the power source before proceeding to ensure your safety.

Step 1: Empty the Platter Pocket

Start by removing all items from the Platter Pocket. This will make it easier to access the mounting brackets and screws holding the Platter Pocket in place. Take the opportunity to clean any dirty or soiled dishes before putting them back into the refrigerator.

Step 2: Locate the Mounting Brackets

The Platter Pocket is secured to the refrigerator wall with mounting brackets. These brackets can be found on either side of the Platter Pocket. They are typically metal and have screws holding them in place.

Step 3: Unscrew the Mounting Brackets

Using a flathead screwdriver, carefully unscrew the screws that hold the mounting brackets in place. Be sure to keep track of the screws as you will need them later for reinstalling the Platter Pocket. Once the screws are removed, gently slide the Platter Pocket out of the brackets.

Cleaning the Platter Pocket

With the Platter Pocket successfully removed, it’s time to give it a good cleaning. This is especially important if you notice any dirt, grime, or food residue built up in the pockets or corners of the Platter Pocket.

Step 1: Prepare a Cleaning Solution

Create a mild cleaning solution by mixing a small amount of detergent or cleaning solution with warm water. Avoid using abrasive cleaners or harsh chemicals as they may damage the Platter Pocket material.

Step 2: Wipe Down the Platter Pocket

Dip a clean cloth into the cleaning solution and gently wipe down the entire surface of the Platter Pocket. Pay close attention to the corners and pockets where dirt and debris may accumulate. Rinse the cloth frequently and continue wiping until the Platter Pocket is clean.

Step 3: Dry the Platter Pocket

After cleaning, use a dry cloth or towel to thoroughly dry the Platter Pocket. It is important to ensure that there is no moisture left behind, as this could lead to mold or mildew growth in the future.

Reinstalling the Platter Pocket

Once the Platter Pocket is clean and completely dry, it’s time to reinstall it into your Whirlpool refrigerator.

Step 1: Align the Mounting Brackets

Take the Platter Pocket and align it with the mounting brackets on the refrigerator wall. Make sure the brackets are properly aligned with the holes in the Platter Pocket.

Step 2: Secure the Mounting Brackets

Using the screws you removed earlier, securely fasten the mounting brackets to the Platter Pocket. Use the flathead screwdriver to tighten the screws, ensuring that the Platter Pocket is securely attached to the refrigerator.

Step 3: Test the Platter Pocket

Lastly, double-check that the Platter Pocket is securely attached by giving it a gentle tug. It should not come loose or wobble. Once you are satisfied with the installation, you can proceed to place your dishes and flat items back into the Platter Pocket.

Conclusion

Removing the Platter Pocket from your Whirlpool refrigerator is a simple process that can be done with just a few basic tools. By following the step-by-step guide outlined above, you can easily remove, clean, and reinstall the Platter Pocket, ensuring that it remains a convenient and functional feature in your refrigerator. Remember to always unplug the refrigerator before starting any maintenance or cleaning tasks for your safety.

Leave a Comment